Features:
The product is featured by high transparency, good printing performance etc. Die head rotates 360°continuously to enhance the evenness of film

General features:

• Model: SJPP-65
• Maximum Film width: 800mm
• Output capacity: around 45kg/h
• Power supply: 380V three phase; 50Hz
• Raw Material: PP
• Dimension (L×W×H): 5000mm×3000mm×5000mm
• Weight: About 3000kg
• Extruder unit downward blowing type:
• Main motor power: 22kw; controlled by Delta inverter
• Screw diameter: 65mm
• Screw L/D ratio of screw: 30:1
• Speed of screw: 5-100rpm
• Barrel cooling: 1/6 Hp cooling blower
• Film thickness: 0.01-0.1mm
• Gear Box: model 173
• Material of screw and barrel: 38CrMoAlA
• Heating capacity: 25kw
• Rotary inflation head
• Inflation Die: 300mm
• Rotating motor: 0.25KW mini moderating motor
• Cooling air blower: 1.1kw; controlled by Delta inverter
• Aluminum Alloy air ring x 1 set (6 air inlet hose)
• Automatic hopper loader included
• Film bubble ring: 4pcs, different size available
• PP Film Take Down unit
• Film bubble taking motor: 0.75kw; controlled by Delta inverter
• Steel roller/rubber roller length: 1000mm
• Guiding roller: 2pcs
• Stainless A-frame with Gusset device
• Film taking off speed: 5-40m/min
• Dryer: included to dry the PP film
• Corona: 800mm effective width
• Double winding station
• Winding type: by fraction
• Winding motor: 15N/M torque motor
• Torque motor controlled by speed adjuster, easy for operation
• Friction metal/rubber roller: 1000mm
• Maximum winding diameter: 600mm
• Air shaft: 4pcs

Control Panel

1. Temperature of barrel and die head controlled by digital temperature controller
2. Inverter controls main motor driving speed and film taking up motor running speed
3. Electronics used are all Chinese top brand
4. Current meters and Voltage meters show the working state of motors
5. Small fan installed to avoid high temperature caused by long time running